BAICHENG

EPOXY FLOORING

Product Name	EPOXY MIDDLECOAT
Proportion	Mix the water-based epoxy middle coat base compo-nent (Component A) and curing agent (Component B) in the recommended ratio,then add an appropriate amount of silica sand or silica powder (e.g., Component A:Component B = 5:1).
Packaging	20L / 10L / 5L
Storage	Store in a cool, dry place. Best before 12 months.
Construction Area	1kg can cover 8.5m²

This product is a two-component water-based epoxy decorative topcoat, for-mulated with high-purity water-based epoxy resin, special water-based curingagent and high-quality pigments and fillers. Featuring high solids content, lowviscosity and high gloss, it delivers a seamless, smooth and aesthetic paint filmsurface. Using water as the dispersion medium, it contains no toxic volatile or-ganic solvents such as toluene, ensuring a safe and pollution-free construction process.

Excellent Decorative Effect: The surface is smooth and flat, with long-lastingbright colors, dust and moisture resistance. It offers multiple visual effects includ-ing gloss, matte or semi-matte finishes.

Wear and Pressure Resistance: Boasts extremely high surface hardness and superior abrasion resistance, capable of withstanding daily wear and heavy mechancal rolling loads.

Chemical Resistance: Provides good resistance to dilute acids, dilute alkalis,engine oil, grease and other chemical substances.

Environmental Protection & Safety: Extremely low odor and low VOC content,meeting strict environmental standards (e.g., GREENGUARD certification). Con-struction tools can be cleaned directly with water.

It is suitable for flooring environments requiring high cleanliness, wear resistance and aesthetic appearance.

Industrial & Commercial Flooring: Ideal for the final surface coating of load-bearing floors in workshops, warehouses, parking lots, airports, freight centers, etc.

Cleanrooms & Special Environments: Food and beverage factories, biophar-maceutical plants, clean workshops in electronics factories, laboratories, hospi-tal operating rooms, schools, shopping malls, etc.

Underlayment for Surface Materials: Provides ideal underlying protection forhigh-end carpets, PVC floors, etc.

Substrate Preparation: Ensure the intermediate coating is completely dry,sanded smooth and free of sandpaper marks.

Apply a special interfacial agent (1-2 coats) to seal the pores of the substrate and enhance adhesion.

Mixing Ratio: Strictly mix Component A (Main Resin) and Component B (Curing Agent) in the recommended ratio (e.g., 5:1). If necessary, add a smallamount of clean water (5%-10%) to adjust the viscosity.

Application Method: Apply evenly using a short-haired wool roller or spraying equipment. Typically, two coats are required, with sufficient interval time (usually6-12 hours) between coats. Apply the next coat only after the previous coat hasdried to touch.